Metal barrel load

Metal barrel load - Assembly manual

Printing

• We recommend using PLA filaments, 0.4 mm nozzle and 0.2 mm layer height, but you can test other settings as well.
• All elements are placed in print-ready positions, you don't need to rotate them in your slicer.
• Elements are easy to print and do not require the use of supports, brims or rafts.
• Print all elements with 100% fill, but if you like you can try other settings.

Connecting sparts

• To close the barrel, put the top lid on it and twist it clockwise until it stops. To open the barrel you need to turn in the opposite direction.
• If the parts do not fit together, try to file them down gently with a file or trim the disturbing edges with a small knife.

License

This model is free to use.

You can:

• print an unlimited number of models,
• modify and print modified files,
• print models for a gift,
• use printed models for free education.

You can not:

• use models for earn money,
• sell printed models,
• sell any stl files (original or modified),
• publish or distribute any stl files.